Hello , zoals topic na installatie van OpenVPN client op de bos start box niet door na reboot.
voor zover ik kan zien start enigma2 niet ????
Ik heb geen idee of dit iets met de install van openvpn heeft te maken, maar zou het graag
zonder nieuwe image install wiilen fixen, ik kan prima met ssh inloggen na reboot dus hieronder dmesg,
zodat de specialisten er ff naar kunnen kijken, en mij hopelijk tips kunnen geven. Ik had zelf wel al in een startscript
de date setting gepropt.
Aan de guru´s is er iets behalve reflashen dat ik kan doen ?
grtz dawood
Hieronder dmesg.
root@vuuno:~# date
Sat Jun 20 00:12:34 CEST 2015
root@vuuno:~# top
Mem: 25944K used, 249052K free, 0K shrd, 0K buff, 13212K cached
CPU: 0% usr 4% sys 0% nic 95% idle 0% io 0% irq 0% sirq
Load average: 0.00 0.03 0.02 2/63 398
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
398 396 root R 2944 1% 5% top
280 279 root S 10192 4% 0% /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
196 1 root S 7252 3% 0% smbd -D
215 196 root S 7252 3% 0% smbd -D
194 1 root S 4124 1% 0% nmbd -D
275 1 avahi S 3724 1% 0% avahi-daemon: running [vuuno.local]
276 275 avahi S 3724 1% 0% avahi-daemon: chroot helper
279 1 root S 3528 1% 0% /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
396 395 root S 3264 1% 0% -sh
245 1 messageb S 3084 1% 0% /usr/bin/dbus-daemon --system
261 1 root S 3060 1% 0% /usr/sbin/inetd
395 253 root S 2964 1% 0% /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 -s -g
268 1 root S 2944 1% 0% /sbin/klogd -n
259 1 root S 2944 1% 0% /usr/sbin/crond -c /etc/cron/crontabs
265 1 root S 2940 1% 0% /sbin/syslogd -n -O /var/log/messages
253 1 root S 2708 1% 0% /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 -s -g
230 1 root S 2628 1% 0% /usr/sbin/rpcbind
1 0 root S 1940 1% 0% init [3]
10 2 root SW 0 0% 0% [rcu_sched]
11 2 root SW 0 0% 0% [migration/1]
8 2 root SW 0 0% 0% [migration/0]
48 2 root SW 0 0% 0% [ubi_bgt0d]
2 0 root SW 0 0% 0% [kthreadd]
22 2 root SW 0 0% 0% [kworker/0:1]
44 2 root SW 0 0% 0% [scsi_eh_1]
43 2 root SW 0 0% 0% [scsi_eh_0]
3 2 root SW 0 0% 0% [ksoftirqd/0]
4 2 root SW 0 0% 0% [kworker/0:0]
5 2 root SW< 0 0% 0% [kworker/0:0H]
6 2 root SW 0 0% 0% [kworker/u:0]
7 2 root SW< 0 0% 0% [kworker/u:0H]
9 2 root SW 0 0% 0% [rcu_bh]
12 2 root SW 0 0% 0% [ksoftirqd/1]
13 2 root SW 0 0% 0% [kworker/1:0]
14 2 root SW< 0 0% 0% [kworker/1:0H]
15 2 root SW< 0 0% 0% [khelper]
16 2 root SW 0 0% 0% [kdevtmpfs]
17 2 root SW 0 0% 0% [bdi-default]
18 2 root SW< 0 0% 0% [kblockd]
19 2 root SW< 0 0% 0% [ata_sff]
20 2 root SW 0 0% 0% [khubd]
21 2 root SW< 0 0% 0% [cfg80211]
23 2 root SW< 0 0% 0% [rpciod]
24 2 root SW 0 0% 0% [kworker/1:1]
25 2 root SW 0 0% 0% [kswapd0]
26 2 root SW 0 0% 0% [fsnotify_mark]
27 2 root SW< 0 0% 0% [nfsiod]
28 2 root SW< 0 0% 0% [cifsiod]
29 2 root SW< 0 0% 0% [crypto]
45 2 root SW 0 0% 0% [kworker/u:1]
46 2 root SW 0 0% 0% [kworker/u:2]
47 2 root SW< 0 0% 0% [deferwq]
49 2 root SW 0 0% 0% [ubifs_bgt0_0]
102 2 root SW 0 0% 0% [flush-ubifs_0_0]
394 2 root SW 0 0% 0% [kworker/0:2]
Mem: 25928K used, 249068K free, 0K shrd, 0K buff, 13220K cached
CPU: 0% usr 0% sys 0% nic 99% idle 0% io 0% irq 0% sirq
Load average: 0.00 0.03 0.02 2/63 398
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
398 396 root R 3264 1% 0% top
395 253 root S 2964 1% 0% /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 -s -g
280 279 root S 10192 4% 0% /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
196 1 root S 7252 3% 0% smbd -D
215 196 root S 7252 3% 0% smbd -D
194 1 root S 4124 1% 0% nmbd -D
275 1 avahi S 3724 1% 0% avahi-daemon: running [vuuno.local]
276 275 avahi S 3724 1% 0% avahi-daemon: chroot helper
279 1 root S 3528 1% 0% /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
396 395 root S 3264 1% 0% -sh
245 1 messageb S 3084 1% 0% /usr/bin/dbus-daemon --system
261 1 root S 3060 1% 0% /usr/sbin/inetd
268 1 root S 2944 1% 0% /sbin/klogd -n
259 1 root S 2944 1% 0% /usr/sbin/crond -c /etc/cron/crontabs
265 1 root S 2940 1% 0% /sbin/syslogd -n -O /var/log/messages
253 1 root S 2708 1% 0% /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 -s -g
230 1 root S 2628 1% 0% /usr/sbin/rpcbind
1 0 root S 1940 1% 0% init [3]
10 2 root SW 0 0% 0% [rcu_sched]
11 2 root SW 0 0% 0% [migration/1]
8 2 root SW 0 0% 0% [migration/0]
48 2 root SW 0 0% 0% [ubi_bgt0d]
2 0 root SW 0 0% 0% [kthreadd]
22 2 root SW 0 0% 0% [kworker/0:1]
44 2 root SW 0 0% 0% [scsi_eh_1]
43 2 root SW 0 0% 0% [scsi_eh_0]
3 2 root SW 0 0% 0% [ksoftirqd/0]
4 2 root SW 0 0% 0% [kworker/0:0]
5 2 root SW< 0 0% 0% [kworker/0:0H]
6 2 root SW 0 0% 0% [kworker/u:0]
7 2 root SW< 0 0% 0% [kworker/u:0H]
9 2 root SW 0 0% 0% [rcu_bh]
12 2 root SW 0 0% 0% [ksoftirqd/1]
13 2 root SW 0 0% 0% [kworker/1:0]
14 2 root SW< 0 0% 0% [kworker/1:0H]
15 2 root SW< 0 0% 0% [khelper]
16 2 root SW 0 0% 0% [kdevtmpfs]
17 2 root SW 0 0% 0% [bdi-default]
18 2 root SW< 0 0% 0% [kblockd]
19 2 root SW< 0 0% 0% [ata_sff]
20 2 root SW 0 0% 0% [khubd]
21 2 root SW< 0 0% 0% [cfg80211]
23 2 root SW< 0 0% 0% [rpciod]
24 2 root SW 0 0% 0% [kworker/1:1]
25 2 root SW 0 0% 0% [kswapd0]
26 2 root SW 0 0% 0% [fsnotify_mark]
27 2 root SW< 0 0% 0% [nfsiod]
28 2 root SW< 0 0% 0% [cifsiod]
29 2 root SW< 0 0% 0% [crypto]
45 2 root SW 0 0% 0% [kworker/u:1]
46 2 root SW 0 0% 0% [kworker/u:2]
47 2 root SW< 0 0% 0% [deferwq]
49 2 root SW 0 0% 0% [ubifs_bgt0_0]
102 2 root SW 0 0% 0% [flush-ubifs_0_0]
394 2 root SW 0 0% 0% [kworker/0:2]
root@vuuno:~# init.d
-sh: init.d: not found
root@vuuno:~# ls
enigma2_crash.log resumepoints.pkl
root@vuuno:~# ls
enigma2_crash.log resumepoints.pkl
root@vuuno:~# dmesg
Linux version 3.9.6 (build@buildserver) (gcc version 4.9.1 (GCC) ) #1 SMP Mon Feb 16 06:46:20 CET 2015
Fetching vars from bootloader... found 11 vars.
Early serial console at MMIO32 0x10400b00 (options '115200n')
bootconsole [uart0] enabled
Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 pci=1 smp=1 moca=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
bootconsole [early0] enabled
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 16 MB LINUX region at 7 MB (0x010c6000@0x0073a000)
bmem: adding 232 MB RESERVED region at 24 MB (0x0e800000@0x01800000)
bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
Zone ranges:
Normal [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x0fffffff]
node 0: [mem 0x20000000-0x2fffffff]
On node 0 totalpages: 131072
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6400 r8192 d14080 u32768
pcpu-alloc: s6400 r8192 d14080 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 274736k/524288k available (5587k kernel code, 249552k reserved, 1440k data, 260k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 405 MHz (202.500 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 401.40 BogoMIPS (lpj=200704)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io 0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io 0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
pci 0000:01:00.0: [14e4:8602] type 00 class 0x01010f
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.21)
msgmni has been set to 536
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
sata_brcmstb 0000:01:00.0: version 4.0
__clk_enable: sata [1]
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
sata_brcmstb 0000:01:00.0: setting latency timer to 64
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1d:ec:02:ce:3d)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
EBI CS0: setting up NAND flash (primary)
ata1: SATA link down (SStatus 4 SControl 300)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Block size=00020000, erase shift=17
NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0
Found NAND on CS0: ACC=f7ff1010, cfg=15142200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0302 128MB @00000000
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan: mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
nand_read_bbt: Bad block at 0x05ce0000
Creating 8 MTD partitions on "brcmnand.0":
0x000000000000-0x000007200000 : "rootfs"
0x000007200000-0x000007600000 : "kernel"
0x000007600000-0x000007a00000 : "boot"
0x000007a00000-0x000007c00000 : "splash"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd0 to ubi0
ata2: SATA link down (SStatus 4 SControl 300)
UBI: scanning is finished
UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 9, need 19
UBI: attached mtd0 (name "rootfs", size 114 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 911, bad PEBs: 1, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 7/2, WL threshold: 4096, image sequence number: 2038912481
UBI: available PEBs: 0, total reserved PEBs: 911, PEBs reserved for bad PEB handling: 9
UBI: background thread "ubi_bgt0d" started, PID 48
ALSA device list:
No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 49
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 112627712 bytes (107 MiB, 887 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 05413617-6CAE-4C61-9D9A-39AC35F79810, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 260k freed
root@vuuno:~# /etc/init.d/openvpn
Usage: /etc/init.d/openvpn {start|stop|reload|restart|force-reload}
root@vuuno:~# /etc/init.d/openvpn start
Starting openvpn: openvpn.
root@vuuno:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1D:EC:02:CE:3D
inet addr:192.168.1.2 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1317 errors:0 dropped:0 overruns:0 frame:0
TX packets:726 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:149492 (145.9 KiB) TX bytes:89383 (87.2 KiB)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 
TX bytes:0 (0.0
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.8.0.34 P-t-P:10.8.0.33 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 TX bytes:0 (0.0
root@vuuno:~#